1. This is for the extended barrel version of the Drozd. This procedure will also work for the stock
version, just remove the muzzle barrel bushing (see part number 's on the drozd) leave the MAG in the
gun. To proceed with removal, first GENTLY grip the barrel ( or barrel device) with plyers( see below).
I like using a piece of leather to grip the barrel, but if you dont mind a few scratches just use the
plyers. Next unscrew just as you would any screw or bolt.
**note There should always be 1" of 8mm barrel, just like the stock drozd, on the magazine side. If
you dont know what I mean, just remove your stock barrel and look at it.

2. Turn the Drozd barrel counter clockwise to losen, keep turning untill it comes out. As soon as it
comes out you will see the two halves come appart. If not just gently pull the gun apart at he seams.
**Note that I have extended the wires to make it easier to take apart